Tile and Grout Cleaning Procedures

A Few Tile and Grout Cleaning Procedures Used by Professionals

Cleaning grout can be quite difficult because it is a porous item that is very much prone to staining and is easily affected by grime, dirt, grease etc. Additionally, in the bathroom, accumulated grease can grime can lead to the growth of mould and mildew and when this happens, you will need to call professional cleaners in Richmond who will use a variety of techniques to clean the tile and grout.

So, let us now see the procedures involved that the professionals use.

1) Using Stifled Brush Along with Warm Water

The cleaners providing the tile and grout cleaning in Richmond will use a stifled brush for the procedure along with warm water. So, if you are planning a DIY, you can get one too from a local hardware store.

The professionals will spray the water edges of the grout and use the brush in a circular motion to remove the dirt and grime. And when it’s clean, they will let it dry.

2) Using Vinegar Along with Warm Water

If the stains are deeper and caused due to heavier dirt, the professionals will use vinegar and warm water in the cleaning service. They will mix the vinegar with the warm water and will spray the solution on the grout. And after four to five minutes when the dirt and grime loosens, they will remove them using the stifled brush.

3) Spraying Vinegar Along with Baking Soda

Another procedure that is being used by the cleaners is applying water and baking soda on the grout lines. After the application, they spray vinegar on it to loosen the accumulated dirt and grease and leave it for a few minutes after which they use plain water and brush to remove them.

4) Cleaning with Hydrogen Peroxide

A professional tile and grout cleaning company in Richmond will mainly use hydrogen peroxide to clean moderate stains. This is an easily available chemical that is mixed with baking soda to make a paste.

This paste is applied to the grout lines and after leaving them for a while, they are removed with the brush as usual absorbing the accumulated grime with it.

5) The Bleaching Method

This method is used when there the stains are harder to remove.

The professionals use oxygen bleach that is easily available as a powder in hardware stores. They first make sure that the area is clean and airy around. Then, they leave the bleaching powder for around 15 minutes and then rinse with plain water which instantly removes the dirt from the edges of the grout.

6) Using Chlorine Bleach

Another cleaning solution is the chlorine bleach that is very effective against accumulated dirt and grime. It has the power to remove very deep stains caused by accumulated dirt that are hard to clean.

The professionals use the chlorine bleach in the same way as they apply the oxygen bleach for achieving the best results.

Contact Us Now For a Fast and Affordable Grout Cleaning Service

Feel Fresh Cleaning Services provides budget-friendly tile and grout cleaning service near Richmond where our cleaners use advanced cleaning techniques. Also, they complete their service on time and with perfection to restore the appeal of your bathroom. So, give us a call now and book your service.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *